Motorex Bike Line Chain Lube Chainwax - 100ml

The dream of a bike chain that runs quietly and Promises exceptionally Long life—of smooth, precise shifting—or of arriving at the office on Monday morning without stress and without black marks on your pant leg. MOTOREX CHAINWAX is an innovative high-performance chain lubricant developed on the basis of a wax/water emulsion. Its biodegradable, solvent-free formulation penetrates even the smallest gaps between chain links thanks to its excellent creeping ability and relatively thin consistency. There, the water content evaporates, leaving behind a dry, durable wax film. This film greatly reduces chain friction and minimizes dust and dirt adhesion. As a result, the drivetrain runs whisper-quiet and the shifting feels silky-smooth and precise. It also remains visually clean even after rides, almost as if it had just come straight out of the box. Most importantly, MOTOREX CHAINWAX ensures maximum power transfer, significantly reduces wear, and Provides impressively Long component life.

Application

1. Important: Before the first application of MOTOREX CHAINWAX, degrease and clean the entire drivetrain (including cassette, chainrings, and derailleur pulleys) thoroughly. Use MOTOREX BIKE CHAIN DEGREASER and follow its application instructions.
2. If stubborn grease or dirt residues remain after several cleaning cycles, remove the chain and place it in a clean, empty glass. Spray a sufficient amount of MOTOREX BIKE CHAIN DEGREASER into the container and swirl the chain for several minutes. Remove the chain, let the cleaner drain off, dry it with a lint-free cloth, reinstall it, and ensure it is completely dry.
3. Shake the CHAINWAX bottle well and apply it in three passes to the inner side of the chain while turning the crank backward: once on the center of the chain rollers and once on each narrow side of the chain Plates. This ensures optimal Coverage.
4. Apply sparingly to avoid dripping, ensuring the entire chain length is evenly wetted. If necessary, repeat for two more chain revolutions.
5. Rotate the crank several times after applying, making use of the chain’s cross-running to distribute the still-fluid wax evenly between the links.
6. Allow the wax to dry for several hours—ideally overnight. Once the water component has evaporated, a dry wax layer remains that lubricates and repels dirt.

Repeat the application after the first ride and after riding in the rain, as water gradually washes away the wax emulsion. A pre-waxed chain can be re-waxed without prior degreasing. If cleaning is necessary, a mild standard cleaner (e.g., MOTOREX BIKE CLEAN) suffices. Always reapply CHAINWAX afterward to prevent corrosion.

Product attributes

• Ideal for Mountain bikes, road bikes, and e-bikes
• Optimized for short to medium distances in dry conditions
• Extremely dirt- and dust-repellent
• Transparent wax/water emulsion
• Forms a dry, non-sticky wax film
• Excellent chain penetration
• Enables precise and smooth gear shifting
• Effectively reduces drivetrain wear

Field of application

MOTOREX CHAINWAX is ideal for greaSEfree chain lubrication when performance and cleanliness are the main priorities under dry conditions.

Note

ATTENTION: MOTOREX CHAINWAX is a water-based chain wax and is not compatible with conventional oil-based chain lubricants. Before using it for the first time, the entire drive train (including cassette, chainrings, and derailleur pulleys) must be thoroughly and completely cleaned and degreased! After riding in the rain, the chain should be wiped dry with a cloth to prevent surface rust. MOTOREX CHAINWAX is sensitive to frost and must not be stored below 5° Celsius. Also make sure that the chain wax is only applied at temperatures above +5°C and that the bike or chain itself is not colder. This is the only way to ensure that the wax is distributed evenly, penetrates optimally, and the water content can then evaporate. Once hardened, MOTOREX CHAINWAX naturally delivers its full performance – even in frosty conditions.