The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The DENALI T3 Modular Switchback Signal Pods combine white daytime running lights (DRL), red rear running and brake lights, and amber turn signals in one versatile lighting system. Front T3 pods feature bright white running lights that switch to amber when the turn signal is activated. Rear T3 pods feature bright red running and brake lights that also switch to amber for signalling.

Unlike conventional switchback signals that use lower-output bi-colour LEDs, the T3 uses two separate rows of high-power, single-colour LEDs for exceptional brightness. The result is a powerful light pod with output comparable to 10 W LED driving lights.

Combining high-power LEDs with a versatile, low-profile design, the DENALI T3 delivers excellent visibility and flexible mounting options in a compact switchback signal system.

Features:

• Switchback Functionality: White daytime running light (DRL) switches to amber turn signal.
• Dual-Circuit DRL: 50% output on low and 100% output on high.
• Wide Viewing Angle: 180-degree visibility.
• High-Power LEDs: Six LEDs per pod.
• Low-Profile Design: Compact housing for versatile mounting options.
• Easy Installation: Connects to the vehicle's DRL and turn signal circuits.
• E-Mark Approved: Approved for DRL and turn signal use.

Specifications:

• Power Draw: 0.12 A DRL (low) / 0.25 A DRL (high); 0.55 A turn signal
• Input Voltage: 12 V DC
• Dimensions: 2.9 × 1.13 × 0.5 in
• Weight: 0.08 lb
• Raw Lumens: 870
• Waterproof Rating: IP67

What's Included:

• 2 × rear signal pods
• 2 × wiring pigtails with waterproof connectors
• 4 × mounting screws
• 8 × Posi-Taps
• DENALI T3 licence plate light mount
• Illustrated installation instructions

Fitment Note:

• Designed specifically for US licence plates. Modifications may be required to fit non-US licence plates.

Compatibility Note: DENALI T3 Rear Pods are not currently compatible with BMW R1250GS/A or R1300GS/A motorcycles unless used with a DENALI CANsmart. When powered through a CANsmart, the red running light remains illuminated between amber turn signal flashes. This is an unavoidable result of powering the T3 pods solely through the CANsmart. To turn off the red running light while the amber signal is active, connect the pods' red running light wires directly to a switched power source on the motorcycle and set the CANsmart brake light circuit to brake-only mode.