Ferodo High Performance Clutch Plate Kit with Friction and Drive plates are designed as a racing replacement set for the original fitment items.

  • FCS0454/3 contains 6 Hi Performance & 2 STD compound friction plates and 7 steel drive plates.

  • Note: The two STD compound plates must be fitted one at each outer end of the clutch pack.
    The friction material of the Hi Performance Friction Plates do not contain any cork or rubber material to assist with the reduction of sticking or slippage.
    The friction material of the STD friction Plates do contain cork or rubber material and are for the outer end/s of the clutch pack.

    The Steel Drive Plates eliminate the problem of aluminium drive plate wear and contamination of the engine / transmission oil.
  • A Heavy Duty Clutch Spring Kit is available as an optional service item.
  • To enhance the benefits when fitting new Ferodo Clutch Plates, Ferodo recommends that new oil should be used.
  • Tip: New friction plates should be submersed in the new engine or transmission oil for two hours prior to fitment.
    This allows the clutch plate material to absorb the oil to assist with the initial start up and ongoing usage.
  • Ferodo suggest the other clutch components be thoroughly inspected for wear and suitablity prior to re-assembly - replace if necessary.
  • (05-0454-30)

    SKU 05-0454-30
    Brand Ferodo
    Unit Of Measure each
    Modified Item No
    Placement On Vehicle Rear
    Type Friction & Steel Plates
    Machine Type Motorbike
    Product Type Clutch Kit

    Be The First To Review This Product!

    Help other RPM Moto users shop smarter by writing reviews for products you have purchased.

    Write a product review