Denali 2.0 DR1 Motorbike LED Light Kit with DataDim technology

Denali 2.0 Light Kits are brighter, more robust and a lot more versatile.

The unique oversized reflector in the DR1 creates an industry leading 1000 foot beam distance from a single pair of 10 watt LEDs. No other 10 watt LED even comes close. The DR1 is ideal for night riding conditions where maximum beam distance is desired. The included pair of TrueHybrid™ lenses carry official E-Mark certification and create a more balanced combination of distance and width.

Equipped with DataDim Technology and a modular HotSwap wiring harness, the Lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch.

DrySeal submersible waterproof construction and Impact PC Bezels create super durable Light and switch housings that can withstand the most extreme environments without giving up.

DENALI 2.0 Features

HiDrive High-Intensity Cree LED's - 2.0 Lights feature the latest development from Cree, a new Hi-IntensityÂ LED chip that features a redesigned primary optic to maximize Light output through secondary optics. The HiÂ series LED\'s are more efficient, producing 20% more Light output (lumens) without increasing power draw.
TriOptic Multi-Beam Lens System - 2.0 Light Kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one Kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds.
DataDim LED Dimming Technology - All 2.0 Light pods are equipped with a dedicated 3rd-wire dimming circuit so you can use an external signal to reliably control the intensity of the LED chip at the source. Plug in a DataDim Controller (sold separately) to enable the Denali Lights to switch between half and full intensity with your vehicle\'s original high beam switch. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.
HotSwap Modular Wiring Harness System - Premium wiring harness features high-quality waterproof components and Denali\'s clever HotSwap™ design, which enables an effortless swap from the standard single-intensity relay to their dual-intensity DataDim Controller (sold separately).
DrySeal Submersible Waterproof Illuminated Switch - Denali\'s beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh outdoor abuse on powersports vehicles. Its clever design can be either flush or bar mounted.
DrySeal Submersible Waterproof Light Housings - In addition to molded silicone gasket seals, Denali use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures their housings are 100% watertight, even when submerged underwater with the wires cut and connector removed.
Impact PC Corrosion-Proof Bezels - moulded in 100% polycarbonate to create an impenetrable surface that won't rust, fade or corrode, even after taking repeated impacts from rocks and debris.
LiveActive Intelligent Thermal Management - LED's last longer and put out more Light when they are kept cool. 2.0 Lights feature cutting edge LED drivers that work with Denali\'s uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure their Lights stay cool enough to maintain the maximum Light output when you need it most.
Chrome Plated Optic Holders - Previously white, the 2.0 optic holders are plated in bright chrome. This subtle attention to detail maximizes reflectivity and refines the appearance of the lamps to match the original chrome reflectors of your vehicle\'s Headlights.
Low-Profile Mount with Stainless Steel Hardware - 2.0 Light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile mounting hinge creates a super clean installation while maintaining maximum strength.
Handlebar Switch Mounts Included - Beefy, Lighted, submersible waterproof switch engineered from the ground up to withstand harsh outdoor abuse on powersports vehicles. Its clever design can be either flush or bar mounted and the 7/8" and 1" mounts are included in all 2.0 Light Kits.
E Mark Lenses Included - In addition to providing three beam options in one Kit, the second set of included lenses carry an offcial E-Mark certification. This ensures you can stay street-legal on-road while maintaining the option for maximum distance off-road.

D2 Kit Product Specs:

LED\'s: (2x) 10 Watt Cree XPL HI
Power Draw: 1.6 Amps
Beam Distance (Spot): 1000 Feet
Beam Width (Spot): 74 Feet
Raw Lumens: 2190
Intensity: Single Intensity Harness
DataDim Compatible: Yes
Operating Voltage: 12 VDC
Pod Size: 3.7" Round x 3.8" Deep

D2 Kit Contents