< Back to Battery Chargers
Battery Controller K900 Evo+ battery charger 12V 1A Can Bus added to cart
There are {num} of Battery Controller K900 Evo+ battery charger 12V 1A Can Bus left

Battery Controller K900 Evo+ battery charger 12V 1A Can Bus

Part Number:

BCK900EVO


Total Price

$129.00

Loyalty Points

645 points equivalent to $6.45

Description

BC K900 EVO+ is specifically designed for charging and maintaining all 12V lead acid batteries (VRLA, MF, AGM, EFB, gel, Ca/Ca etc) and 12V Lithium / LiFePO4 batteries.

BC K900 EVO+ will charge lead / acid batteries with a capacity from 1.2 - 100Ah and LiFePO4 batteries from 1 - 100Ah.

BC K900 EVO+ is the only battery charger compatible with CAN-BUS for lead acid and lithium batteries. CAN-BUS programs allow you to charge the battery directly from the DIN 4165 socket installed on BMW motorcycles.

Lead / acid batteries - 8 cycle charging technology

1. Initialization: the device checks if one or more cells are shorted in order to verify that the battery is in a proper condition to be recharged /recovered.
2. Recovery: if the battery is deep discharged (battery voltage starting from 1.25V), the device tries to recover it, taking it back to a higher voltage.
3. Soft Charge: if the battery is in a condition of significant undercharge the device provides a light pulsing current to the battery to overcome this critical phase.
4. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery capacity.
5. Desulfation / Absorption: the device provides a "controlled overcharge" to recover the remaining 10-15% of the battery capacity, through the desulfation / recovery of the lead-acid cells (for low or medium sulfation).
6. Battery Analysis: the device stops providing current to the battery for a short time in order to verify whether the battery is able to retain the charge received. This test is periodically repeated during the Maintenance.
7. Maintenance: the device keeps the battery in the best charge condition for very long periods (even months) during which your vehicle is left unused, without any possible drawback (battery overcharge, battery overheating, water and / or electrolyte loss, etc).
8. Equalization: every 30 days during long term maintenance, the device executes an equalization charge in order to balance the battery lead-acid cells avoiding electrolyte stratification within the cells.


Lithium / LiFePO4 batteries - 7 cycle charging technology
1. Initialization: the device checks if one or more cells are shorted in order to verify that the battery is in a proper condition to be recharged / recovered.
2. Recovery: if the battery is deep discharged (battery voltage starting from 1.25 V), the device tries to recover it, taking it back to a higher voltage.
3. Soft Charge: if the battery is in a condition of significant undercharge the device provides a light pulsing current to the battery to overcome this critical phase.
4. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery capacity.
5. Equalization: in this phase the remaining 10-15% of the battery capacity is recovered and the level of charge of the battery cells is rebalanced.
6.Battery Analysis: the device stops providing current to the battery for a short time in order to verify whether the battery is able to retain the charge received. This test is periodically repeated during the Maintenance.
7. Maintenance: thanks to an electronic circuit the charger executes a pulsing maintenance charge when the battery is not used, in a very safe way, without any risk of overheating or overcharge.


Included in the package:
- BC K900 EVO+ for long term battery maintenance
- 2M long power cable and a battery output cable
- waterproof battery cable with eyelets
- battery cable with clamps
- universal cigar socket adapter 18mm / 12mm also compatible with BMW DIN 4165 socket
- User Manual


3 year warranty
Copyright © 2017 RPM Moto
Powered by Web Design Magic & Kentico